Unit Converter / Points to Millimeters
Points to Millimeters Converter
1 point = 0.3528 millimeters at 96 DPI, the CSS reference resolution. To convert, multiplypoints by 0.3528: pt × 0.3528 = mm. Change the DPI below for print and image work, where a pixel is whatever the output resolution says it is.
Points to Millimeters table
Standard values at 96 DPI.
| Points (pt) | Millimeters (mm) |
|---|---|
| 6 | 2.1167 |
| 8 | 2.8222 |
| 9 | 3.175 |
| 10 | 3.5278 |
| 11 | 3.8806 |
| 12 | 4.2333 |
| 14 | 4.9389 |
| 16 | 5.6444 |
| 18 | 6.35 |
| 24 | 8.4667 |
| 36 | 12.7 |
| 72 | 25.4 |
How the conversion works
The type unit: font sizes are measured in points, exactly 72 to the inch since the PostScript definition (the older metal-type point was slightly smaller). The fine metric unit: print tolerances, paper (A4 is 210 by 297 mm) and CSS print stylesheets use millimeters. Exactly 25.4 mm make an inch. The CSS specification anchors the whole system to the inch: at the reference resolution of 96 DPI, one inch is exactly 96 pixels, one point is 96/72 pixels, and the metric units follow from the inch being exactly 25.4 millimeters. Converting points to millimeters therefore goes through that anchor: points to pixels, then pixels to millimeters. For example,12 pt = 4.2333 mm.
The DPI setting matters only when pixels meet the physical world. On screen, CSS pixels are defined by the 96 DPI reference and the conversion above is exact. In a 300 DPI print file or image, an inch holds 300 pixels instead, so the same measurement converts differently; set the resolution to match the file you are working with.